Klover Products Inc.

5807 W Fenrick Rd 53548 Janesville, WI
Phone:
  • KM-09-ACC-KEQ Kit for long-range audio capture
  • KM-09-ACC-G3 Kit for long-range audio capture
  • KM-09-ACC-MKE Kit for long-range audio capture
  • KM-09-ACC-KEQ Kit for long-range audio capture
  • KM-09-ACC-ML Kit for long-range audio capture
  • Klover MiK 09 ACC parabolic mic
  • ACC Mounting Bracket
  • Sennheiser EW 112P G3 Wireless Mic
  • KMEQ Equalized XLR microphone
  • Premium Microphone
  • Wind Cover for 9-inch parabolic mic
 
Loading...

Klover MiK 09 ACC Kit

$479.00$999.00

Our KM-09 ACC kits combine the Accessory Version of the Klover MiK 09 parabolic microphone with the most commonly used accessories.  This version includes the accessory mounting bracket which allows flash shoe accessories, such as compact LED lights, to be mounted to the base of the Klover MiK 09.

Any one of these kits will provide everything you need to begin capturing audio from greater distance than a shotgun microphone.

The kit includes one Accessory Version Klover MiK 09 parabolic microphone (KM-09-ACC) as well as one of each accessory listed below:

Clear
SKU: N/A Categories: ,

LEARN MORE

The Klover MiK 09 is our smallest broadcast quality parabolic microphone.  It turns your omni-directional lavalier mic into a long-range microphone that gathers audio from up to 50 feet in quiet situations.

The Klover MiK 09 Accessory Version includes:

  • Parabolic Dish
  • Microphone Frame
  • Microphone Mounting Rods
  • Microphone Mounting Clips
  • Mounting block with cold shoe slots and 1/4-20 tapped hole
  • Cold shoe mount adapter
  • Mounting rod for use with shotgun mic clamps
Dual Klover Mik 26 Kits w/ Case
Klover MiK 09 Accessory Version

SHIPPING INFORMATION

Weight 4 lbs
Dimensions 13 x 13 x 5 in
Product Code

D

Order Processing

3 to 5 days – contact us if rush shipment is required.

Specifications

Klover MiK 09 specifications

  • Maximum range: 30 to 50 feet
  • Microphone: Omnidirectional pattern lavaliere
  • Dish outside diameter: 9″
  • Parabolic diameter: 8″
  • Dish thickness: 1/8”
  • Weight: Approximately 12 ounces
  • Overall dimensions: 10” x 9” x 3”
  • Package size: 10″ x 10″ x 3.25″
Dual Klover Mik 26 Kits w/ Case
Klover MiK 09 Accessory Version

Microphones

Countryman B3 Specifications

  • Water/Weather Resistant
  • Frequency Response: 20 Hz to 20 kHz
  • Polar Pattern: Omnidirectional
  • Power Requirements: Phantom: 9V to 48V (4mA at 48V)
  • Sensitivity: W4 (no band): 12.0 mV/Pascal (-38 dB re 1V/Pa)
  • Equivalent Acoustic Noise: 24 dBA
  • Overload Sound Level: Phantom: 150 dBA SPL
  • Cable Length:  5 Feet
  • Output Connector: XLR-3 Male
  • Weight: 0.012 oz (0.34 g)
  • Dimensions: 0.23″ x 0.18″ (5.8mm x 4.6mm)
Klover KMEQ Specifications

This microphone is a custom built version of the Countryman B3 which is equalized for our KM-09 and KM-16 parabolic microphones.

  • Water/Weather Resistant
  • Frequency Response: 20 Hz to 20 kHz
  • Polar Pattern: Omnidirectional
  • Power Requirements: Phantom: 9V to 48V (4mA at 48V)
  • Sensitivity: W4 (no band): 12.0 mV/Pascal (-38 dB re 1V/Pa)
  • Equivalent Acoustic Noise: 24 dBA
  • Overload Sound Level: Phantom: 150 dBA SPL
  • Cable Length:  5 Feet
  • Output Connector: XLR-3 Male
  • Weight: 0.012 oz (0.34 g)
  • Dimensions: 0.23″ x 0.18″ (5.8mm x 4.6mm)
Sennheiser MKE2 Specifications

  • Frequency Response: 20Hz to 20kHz +- 3dB
  • Polar Pattern: Omnidirectional
  • Sensitivity (free field, no load) (1 kHz): 10 mV/Pa ±2.5 dB
  • Equivalent Acoustic Noise: 24dB SPL A-Weighted
  • Maximum Sound Pressure: 150 dB (48V, 1mV/Pa mike)
  • Power Requirements: 9V to 48V Phantom (4mA @ 48V)
  • Output Impedance: 600 ohms, balanced
  • Output Connector: XLR-3 Male
  • Dimensions: .23″ x .18″ (5.8mm x 4.6mm)
  • Weight: .012 oz (.34 g)
Microphone Madness ML Specifications

  • Frequency response: 20- 20,000 Hz
  • Signal to noise ratio: 58dB, 1khz at 1pa
  • Open circuit sensitivity : -42dB (5.6 mv) re 1v at 1pa
  • Dynamic range: 90dB, 1kHz
  • Maximum Input Sound Level: 108dB SPL, 1kHz at 1%
  • Flat frequency response
  • Comes with premium holding clip and premium windscreen
  • Output Connector: 3.5 mm TRS
  • 1 Year Warranty
  • 4 foot cable with right-angle connector
Sennheiser EW 112P G3 Specifications

  • Transmission/receiving frequencies: 1680
  • Presets: 12
  • Switching bandwidth: 42 MHz
  • Peak deviation: +/- 48 kHz
  • Compander: HDX
  • Frequency response (microphone): 80 – 18,000 Hz
  • Signal-to-noise ratio: > 110 dB(A)
  • THD, total harmonic distortion: < 0,9 %
  • In compliance with: ETS 300422 , ETS 300445 , CE , FCC
  • Audio-XLR connector: 3.5 mm jack
  • Audio output level (balanced): +10 dBu max
  • Dimensions (Receiver): 82 x 64 x 24 mm
  • Weight (Receiver): ~ 160 g
  • RF output power: 30 mW
  • Operating time: typ. 8 h
  • Input voltage range: 1.8 V line
  • Input voltage range: 3.0 V eff line
  • Dimensions (Transmitter): 82 x 64 x 24 mm
  • Weight (Transmitter): ~ 160 g
  • Transducer; Microphone type: electret
  • AF sensitivity: 20 mV/Pa
  • Sound pressure level (SPL): 130 dB SPL max.
  • Pick-up pattern: omni- directional
  • Dual Klover Mik 26 Kits w/ Case
    Klover MiK 09 Accessory Version

    Reviews

    There are no reviews yet.

    Be the first to review “Klover MiK 09 ACC Kit”

    You may also like…

    Contact Us

    We're not around right now. But you can send us an email and we'll get back to you, asap.

    Not readable? Change text. captcha txt

    Start typing and press Enter to search

    Klover MiK 09 ACC parabolic micKM-26 Dual Parabolic Microphone Kit