Klover Products Inc.

5807 W Fenrick Rd 53548 Janesville, WI
Phone:
 

Klover MiK 16 Pole Mount Kit

$1,299.00$1,479.00

The Pole Mount Kit includes all you need to use the Klover MiK 16 parabolic mic mounted on a pole instead of being held by an operator.  The Hard Mount Bracket replaces the standard handle with clear acrylic plate that allows easy, nearly invisible mounting of the KM-16 to a Magic Arm, or any ¼-20 stud / bolt.

This kit included the bracket and hardware that allows the Hard Mount Bracket to be mounted to a pole or pipe from 1 ½ to 2 ½ inches in diameter.  The bracket shifts the angle of the parabolic dish up or down 15 degrees from axis of the pole.

Includes:

  • Klover MiK-16 parabolic microphone without handles (KM-16-NH)
  • Klover MiK 16 Hard Mount (KM-16-620)
  • Bracket connecting Hard Mound Bracket to pole (1 ½” to 2 ½” O.D.)
  • Countryman B3P4FF05B Lapel Mic with XLR connector (OPTIONAL)
Clear
SKU: KM-16-HM-K-B3-PM Categories: ,

LEARN MORE

The Klover MiK 16 is our mid-size parabolic microphone.  It turns your omni-directional mic into a long-range microphone that gathers audio from long distances.   This long-distance microphone is capable of capturing conversations from up to 300 feet.

Klover MiK 09 Accessory Mounting Bracket
Klover MiK 16 Hard Mount

SHIPPING INFORMATION

Weight 9 lbs
Dimensions 21 x 21 x 9 in
Order Processing

3 to 5 days – contact us if rush shipment is required.

Product Code

A – No mic, B – with mic

Specifications

Klover MiK 16 Specifications:

  • Range: 250 to 300 feet
  • Microphone pickup pattern: Omnidirectional or cardioid pattern
  • Microphone: 20mm Diameter or lavaliere
  • Dish outside diameter: 16″
  • Parabolic diameter: 13.5″
  • Weight: Approximately 2 lbs
  • Overall dimensions: 18” x 16” x 10” (w Handle)
Klover MiK 09 Accessory Mounting Bracket
Klover MiK 16 Hard Mount

Microphone

Microphone Specifications – XLR Microphone

  • Frequency Response: 20Hz to 20kHz +- 3dB
  • Sensitivity (2k ohm load): 10mV/Pa for P/NB3P4FF05xxx; 1mV/Pa for P/NB3P6FF05xxx
  • Equivalent Acoustic Noise: 24dB SPL A-Weighted
  • Maximum Sound Pressure: 150 dB (48V, 1mV/Pa mike)
  • Power Requirements: 9V to 48V Phantom (4mA @ 48V)
  • Output Impedance: 600 ohms, balanced
  • Output Connector: XLR-3 Male (contains preamp)
  • Dimensions: .23″ x .18″ (5.8mm x 4.6mm)
  • Weight: .012 oz (.34 g)
Klover MiK 09 Accessory Mounting Bracket
Klover MiK 16 Hard Mount

Start typing and press Enter to search

KM-09 Accessory Mounting Bracket on Video Camera