Klover Products Inc.

5807 W Fenrick Rd 53548 Janesville, WI
Phone:
  • Klover Mik 26
  • KM-26-TE parabolic mic with electronics
 
Loading...

Sound Devices MM-1 Portable Microphone Preamp

$559.00

“Highly versatile and portable, Sound Devices’ MM-1 is a single-channel, portable microphone preamplifier with a powerful headphone monitoring function. Proven in mission-critical applications, the high-performance microphone preamp’s transformer-balanced input and output and bipolar ±15 volt power supply produce low-noise, low-distortion gain at all switch positions. It features an “unclippable” dual-stage limiter and two-position high-pass filter. Flexible microphone powering provides phantom power at 48 volts or 12 volts and 12-volt T-power. It is powered from two-AA batteries or external 5-18 VDC.”  (Click here for manual.)

SKU: MM-1 Categories: ,

LEARN MORE

  • Gain: (Mic – Line): 0 dB to 66 dB input to output, switch selectable
  • Frequency Response: (Mic – Line) 20 Hz –20 kHz, +0.1, -0.5 dB, -1 dB at 50 kHz (relative to 1 kHz level with 150 ohm source)
  • Equivalent Input Noise: (Mic) -126 dBu (-128 dBV) maximum (150 ohm source, flat weighting, 22 Hz – 22 kHz bandwidth gain setting 36 dB or greater)
  • Dynamic Range: (Mic to Line) 122 dB minimum at the +18 dB gain setting
  • THD + Noise: 0.05% maximum (from 50 Hz – 22 kHz @ +4 dBu output level, 22 Hz – 22 kHz filter bandwidth, +46 dB gain setting
  • Gain Accuracy: (Mic – Line) +0.6, -0.1 dB with reference to front panel gain markings (150 ohm source, 100 k load impedances)
  • Output Clipping Level: (Line) +22 dBu minimum with 100k ohm load+20 dBu minimum with 600 ohm load
  • Input Clipping Level: (Mic) +4 dBu minimum at the 0 or +18 dB gain setting
  • Common Mode Rejection Ratio: 100 dB minimum at 80 Hz60 dB minimum at 10 kHzMaximum of 66 dB of gain, in eleven discrete steps
  • Maximum of 66 dB of gain, in eleven discrete steps
  • Dynamic range exceeding 120 dB
  • 10 Hz to 50 kHz audio bandwidth
  • High immunity to RF interference
  • High current line output driver
  • Transformer-balanced input and output
  • Extended range peak limiter via dual opto-isolators makes preamplifier virtually “unclippable”
  • Selectable 48-volt / 12-volt phantom power or 12-volt “T” power
  • High-pass filter @ 80 or 160 Hz, 6 dB per octave
  • Headphone monitoring of microphone audio, monitor audio, or a mix of both
  • Monitor input accepts mono, balanced or unbalanced line-level inputs on 1/4-inch tip-ring-sleeve connector
  • Separate level control of Monitor gain and overall headphone gain
  • Split ear function via DIP switches
  • Internal battery power (two-AA)
  • Excellent battery life with alkaline and NiMH rechargeable batteries
  • External 5-17 VDC powering
  • High-strength aluminum chassis with durable belt clip
  • Dimensions: 1.95″ x 3.75″ x 6.55″
  • Weight: 1 lb

Whirlwind MD-1 Portable Mic/Line Driver, Headphone Monitor
Countryman B3P4FF05B Lapel Mic/XLR

SHIPPING INFORMATION

Weight 5 lbs
Dimensions 11 x 11 x 5 in

You may also like…

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt

Start typing and press Enter to search