Klover Products Inc.

5807 W Fenrick Rd 53548 Janesville, WI
Phone:
  • Sound Shark LED Pro KMEQ for long-range audio capture
  • Sound Shark mic for long-range audio capture
  • Sound Shark LED with microphone for long-range audio capture
  • KMEQ Equalized XLR microphone
  • Beachtek MicroPro amplifier
  • Beachtek MicroPro amplifier
  • Lume Cube LED lights
  • Wind Cover for 9-inch parabolic mic
 

Sound Shark LED Pro Equalized XLR Kit

$789.00

The Sound Shark LED Pro Equalized XLR Kit includes a Sound Shark LED with our custom accessory bracket and two Lume Cube LED lights.  Also included in the kit is a Wind Cover, our custom omni-directional lapel (lavaliere) microphone and a preamplifier.

The microphone comes with an XLR connect that will work with most professional video cameras and  professional recorders.  Inside the XLR connector, however, is an electronic circuit that equalized the output of the microphone to match the acoustic characteristics of the Sound Shark.  Countryman Associates build this custom microphone for us to provides a deeper, more natural sound from our parabolic microphones while also being water / weather resistant.  Like most XLR microphones, this mic requires “phantom power”.  However, the preamp provides the microphone with optimum power for increased dynamic range and superior overall performance.  (Click here for spec sheet of the non-equalized version of this microphone.)

The Beachtek preamp is a high gain / low noise portable preamplifier with 3.5mm and XLR type microphone jacks.  It also supplies both “plug-in-power” (9 volts D.C.) and “phantom power” (48 volts D.C.) allowing it to work with nearly any microphone. This two channel preamp comes standard with independent output level controls for maximum recording ability!  Use it to raise microphone signal levels to usable line level while minimizing the amplification done by your camera.  Using an external amplifier is this way reduces ambient noise (hiss) very noticeably, especially in quiet environments.  (You may want to refer to our series of blog post on using external amplifiers / mixers to learn more.)  Using the external amplifier also allows you to listen to your audio if your camera does not have a headphone jack.

SKU: SS1-LED-K-KEQ-MP-WC Categories: , ,

LEARN MORE

This kit includes a Sound Shark, an XLR  microphone, 2 LED lights, a preamp, and a wind cover.  It has everything you need to record great audio, and light your subject, in one package.

The Sound Shark can be used with any omni-directional lapel (lavaliere) microphone that works with your camera or recorder.  Cylindrical microphones are preferred as they are slightly more secure in our mounting clip.

Sound Shark LED Professional Kit
Stereo Jack Adapter (3.5-2.5 mm)

SHIPPING INFORMATION

Weight 5 lbs
Dimensions 13 x 13 x 9 in
Order Processing

3 to 7 days – contact us if rush shipment is required

Product Code

E

Specifications

Sound Shark specifications

  • Maximum range: 30 to 50 feet
  • Microphone: Omnidirectional pattern lavaliere
  • Dish outside diameter: 9″
  • Parabolic diameter: 8″
  • Dish thickness: 1/8”
  • Weight: Approximately 12 ounces
  • Overall dimensions: 10” x 9” x 3”
  • Package size: 10.5″ x 11″ x 4″
Sound Shark LED Professional Kit
Stereo Jack Adapter (3.5-2.5 mm)

Microphone

Microphone Specifications – Countryman B3 Microphone

  • Water/Weather Resistant
  • Frequency Response: 20 Hz to 20 kHz
  • Polar Pattern: Omnidirectional
  • Power Requirements: Phantom: 9V to 48V (4mA at 48V)
  • Sensitivity: W4 (no band): 12.0 mV/Pascal (-38 dB re 1V/Pa)
  • Equivalent Acoustic Noise: 24 dBA
  • Overload Sound Level: Phantom: 150 dBA SPL
  • Cable Length:  5 Feet
  • Output Connector: XLR-3 Male
  • Weight: 0.012 oz (0.34 g)
  • Dimensions: 0.23″ x 0.18″ (5.8mm x 4.6mm)
Sound Shark LED Professional Kit
Stereo Jack Adapter (3.5-2.5 mm)

Amplifier

Amplifier Module Specification

  • Maximum Input Levels:  LO gain – 14dBu – HI gain – 29dBu
  • Output Level: 26dBu when level indicators change to red
  • Frequency Response: 20Hz to 20kHz (+/- 0.5dB)
  • THD + N: Less than 0.03% @ 1kHz, -30dBu input
  • S/N Ratio: 85dB @ 1Khz, -30dBu input
  • Gain: LO +15dB – HI +30dB
  • Phantom Power: Regulated 48 volt power – Current to 14mA (direct short)
  • Plug-in Power: 3.5 volts on all mini-jack mic inputs
  • Battery Type: One 9 volt alkaline or lithium battery
  • Battery Duration: 3 hours typical with alkaline battery (no phantom)
    8 hours typical with lithium battery (no phantom)
  • Dimensions: 4” x 3” x 1.5” (L x W x H) (102 mm x 76 mm x 38 mm)
  • Weight: 12 oz. (0.3 kg)
  • 2 Year Warranty
Sound Shark LED Professional Kit
Stereo Jack Adapter (3.5-2.5 mm)

LED Light

LED Light Specifications

  • 1.5″ Cubed
  • Durable Casing
  • 1/4 20 Mount On Bottom
  • 150 LUX @ 9FT. (3M)
  • Color Temperature 6000K
  • Fully Waterproof Up To 100 Feet
  • Rechargeable Via USB Cable
  • Quick Charge
  • 2+ Hours Battery Life at 50%
  • Buttons To Control Light Output Manually
  • Bluetooth Ready
  • Smartphone App To Control Remotely Via Bluetooth
  • Sync and Control Multiple Lights simultaneously
  • Constant Light And Flash Modes
  • Optical Slave Capability
Sound Shark LED Professional Kit
Stereo Jack Adapter (3.5-2.5 mm)

Reviews

There are no reviews yet.

Be the first to review “Sound Shark LED Pro Equalized XLR Kit”

Start typing and press Enter to search

Microphone Adapter CableSound Shark LED Pro kit for long-range audio capture