Klover Products Inc.

5807 W Fenrick Rd 53548 Janesville, WI
Phone:
 
Loading...

Sound Shark LED Professional Kit

$679.00$685.00

The Sound Shark Premium Kit includes a Sound Shark LED with our custom accessory bracket and two Lume Cube LED lights.  Also included in the kit is a Wind Cover and a professional quality omni-directional lapel (lavaliere) microphone custom built for us by Microphone Madness.

This professional level microphone comes with a 3.5mm connector that will work with most cameras and digital recorders and provides dual mono signals. The dual mono connector provides the signal from the microphone to both channels of your stereo recording device.  However, the preamp provides the microphone with optimum power for increased dynamic range and superior overall performance.

The Beachtek preamp is a high gain / low noise portable preamplifier with 3.5mm and XLR type microphone jacks.  It also supplies both “plug-in-power” (9 volts D.C.) and “phantom power” (48 volts D.C.) allowing it to work with nearly any microphone. This two channel preamp comes standard with independent output level controls for maximum recording ability!  Use it to raise microphone signal levels to usable line level while minimizing the amplification done by your camera.  Using an external amplifier is this way reduces ambient noise (hiss) very noticeably, especially in quiet environments.  (You may want to refer to our series of blog post on using external amplifiers / mixers to learn more.)  Using the external amplifier also allows you to listen to your audio if your camera does not have a headphone jack.

Clear
SKU: SS1-LPROK Categories: ,

LEARN MORE

This kit includes a Sound Shark, a premium 3.5mm TRS microphone, 2 LED lights, a preamp, and a wind cover.  It has everything you need to record great audio, and light your subject, in one package.

The Sound Shark can be used with any omni-directional lapel (lavaliere) microphone that works with your camera or recorder.  Cylindrical microphones are preferred as they are slightly more secure in our mounting clip.

Sound Shark Professional Equalized XLR Kit
Sound Shark LED Pro Equalized XLR Kit

SHIPPING INFORMATION

Weight 5 lbs
Dimensions 13 x 13 x 9 in
Order Processing

3 to 5 days – contact us if rush shipment is required.

Product Code

E

Specifications

Sound Shark specifications

  • Maximum range: 30 to 50 feet
  • Microphone: Omnidirectional pattern lavaliere
  • Dish outside diameter: 9″
  • Parabolic diameter: 8″
  • Dish thickness: 1/8”
  • Weight: Approximately 12 ounces
  • Overall dimensions: 10” x 9” x 3”
  • Package size: 10.5″ x 11″ x 4″
Sound Shark Professional Equalized XLR Kit
Sound Shark LED Pro Equalized XLR Kit

Microphone

Microphone Specifications – Premium Microphone

  • Frequency response: 20- 20,000 Hz
  • Signal to noise ratio: 58dB, 1khz at 1pa
  • Open circuit sensitivity : -42dB (5.6 mv) re 1v at 1pa
  • Dynamic range: 90dB, 1kHz
  • Maximum Input Sound Level: 108dB SPL, 1kHz at 1%
  • Flat frequency response
  • Comes with premium holding clip and premium windscreen
  • 1 Year Warranty

This microphone is available with straight or right-angle connectors in lengths of 2, 4, or 6 feet.

Sound Shark Professional Equalized XLR Kit
Sound Shark LED Pro Equalized XLR Kit

Amplifier

Amplifier Module Specification

  • Maximum Input Levels:  LO gain – 14dBu – HI gain – 29dBu
  • Output Level: 26dBu when level indicators change to red
  • Frequency Response: 20Hz to 20kHz (+/- 0.5dB)
  • THD + N: Less than 0.03% @ 1kHz, -30dBu input
  • S/N Ratio: 85dB @ 1Khz, -30dBu input
  • Gain: LO +15dB – HI +30dB
  • Phantom Power: Regulated 48 volt power – Current to 14mA (direct short)
  • Plug-in Power: 3.5 volts on all mini-jack mic inputs
  • Battery Type: One 9 volt alkaline or lithium battery
  • Battery Duration: 3 hours typical with alkaline battery (no phantom)
    8 hours typical with lithium battery (no phantom)
  • Dimensions: 4” x 3” x 1.5” (L x W x H) (102 mm x 76 mm x 38 mm)
  • Weight: 12 oz. (0.3 kg)
  • 2 Year Warranty
Sound Shark Professional Equalized XLR Kit
Sound Shark LED Pro Equalized XLR Kit

LED Light

LED Light Specifications

  • 1.5″ Cubed
  • Durable Casing
  • 1/4 20 Mount On Bottom
  • 150 LUX @ 9FT. (3M)
  • Color Temperature 6000K
  • Fully Waterproof Up To 100 Feet
  • Rechargeable Via USB Cable
  • Quick Charge
  • 2+ Hours Battery Life at 50%
  • Buttons To Control Light Output Manually
  • Bluetooth Ready
  • Smartphone App To Control Remotely Via Bluetooth
  • Sync and Control Multiple Lights simultaneously
  • Constant Light And Flash Modes
  • Optical Slave Capability
Sound Shark Professional Equalized XLR Kit
Sound Shark LED Pro Equalized XLR Kit

Reviews

There are no reviews yet.

Be the first to review “Sound Shark LED Professional Kit”

You may also like…

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt

Start typing and press Enter to search

Sound Shark LED Pro KMEQ for long-range audio captureSound Shark Pro KMEQ kit for long-range audio capture