Sound Devices MM-1 Portable Microphone Preamp (Bundle)

Sale!

“Highly versatile and portable, Sound Devices’ MM-1 is a single-channel, portable microphone preamplifier with a powerful headphone monitoring function. Proven in mission-critical applications, the high-performance microphone preamp’s transformer-balanced input and output and bipolar ±15 volt power supply produce low-noise, low-distortion gain at all switch positions. It features an “unclippable” dual-stage limiter and two-position high-pass filter. Flexible microphone powering provides phantom power at 48 volts or 12 volts and 12-volt T-power. It is powered from two-AA batteries or external 5-18 VDC.”

This unit can be used with any of our XLR microphones.

This product is CE and FCC Part B certified.  (Click here for manual.)

You receive a $20 discount for purchasing this amplifier with a KLOVER MiK!
(This item is only available as part of a bundle.)

$539.00

  • Gain: (Mic - Line): 0 dB to 66 dB input to output, switch selectable
  • Frequency Response: (Mic - Line) 20 Hz –20 kHz, +0.1, -0.5 dB, -1 dB at 50 kHz (relative to 1 kHz level with 150 ohm source)
  • Equivalent Input Noise: (Mic) -126 dBu (-128 dBV) maximum (150 ohm source, flat weighting, 22 Hz – 22 kHz bandwidth gain setting 36 dB or greater)
  • Dynamic Range: (Mic to Line) 122 dB minimum at the +18 dB gain setting
  • THD + Noise: 0.05% maximum (from 50 Hz – 22 kHz @ +4 dBu output level, 22 Hz – 22 kHz filter bandwidth, +46 dB gain setting
  • Gain Accuracy: (Mic - Line) +0.6, -0.1 dB with reference to front panel gain markings (150 ohm source, 100 k load impedances)
  • Output Clipping Level: (Line) +22 dBu minimum with 100k ohm load+20 dBu minimum with 600 ohm load
  • Input Clipping Level: (Mic) +4 dBu minimum at the 0 or +18 dB gain setting
  • Common Mode Rejection Ratio: 100 dB minimum at 80 Hz60 dB minimum at 10 kHzMaximum of 66 dB of gain, in eleven discrete steps
  • Maximum of 66 dB of gain, in eleven discrete steps
  • Dynamic range exceeding 120 dB
  • 10 Hz to 50 kHz audio bandwidth
  • High immunity to RF interference
  • High current line output driver
  • Transformer-balanced input and output
  • Extended range peak limiter via dual opto-isolators makes preamplifier virtually "unclippable"
  • Selectable 48-volt / 12-volt phantom power or 12-volt “T" power
  • High-pass filter @ 80 or 160 Hz, 6 dB per octave
  • Headphone monitoring of microphone audio, monitor audio, or a mix of both
  • Monitor input accepts mono, balanced or unbalanced line-level inputs on 1/4-inch tip-ring-sleeve connector
  • Separate level control of Monitor gain and overall headphone gain
  • Split ear function via DIP switches
  • Internal battery power (two-AA)
  • Excellent battery life with alkaline and NiMH rechargeable batteries
  • External 5-17 VDC powering
  • High-strength aluminum chassis with durable belt clip
  • Dimensions: 1.95" x 3.75" x 6.55"
  • Weight: 1 lb

Additional information

Weight 5.1 lbs
Dimensions 12 × 12 × 4.25 in
Order Processing

3 to 7 days – contact us if rush shipment is required

SKU: MM-1 Categories: ,
English한국어日本語العربيةРусскийDeutschFrançaisEspañol