Sound Shark Pro Wireless Kit
$899.00
The Sound Shark Professional Wireless Kit includes a Sound Shark along with a Wind Cover, and a Sennheiser EW-112P-G4 wireless microphone package (includes the transmitter, receiver, and microphone). This professional level wireless system will allow you to place your Sound Shark away from your camera or recorder. The ME2 lavaliere microphone, that is included with this package, comes with a 3.5mm plug connector with a proprietary locking collar so it cannot plugged directly into cameras or digital recorders.
This wireless microphone system provides a mono (single channel) 3.5mm output connector. Unfortunately most cameras and recorders don’t recognize that there is no signal on the second channel so your recording will only have audio on one channel and the other channel will be silent. You may want to consider purchasing our Stereo Jack Adapter if you camera, or recorder has a stereo microphone jack. If you are using a recording device with an XLR connector, the system provides a cable that converts the output to an XLR connector.
SHIPPING INFORMATION
Weight | 4.5 lbs |
---|---|
Dimensions | 21 × 21 × 5 in |
Order Processing | 3 to 5 days – contact us if rush shipment is required. |
Product Code | E |
Specifications
Sound Shark specifications
- Maximum range: 30 to 50 feet
- Microphone: Omnidirectional pattern lavaliere
- Dish outside diameter: 9″
- Parabolic diameter: 8″
- Dish thickness: 1/8”
- Weight: Approximately 12 ounces
- Overall dimensions: 10” x 9” x 3”
- Package size: 10.5″ x 11″ x 4″
Wireless Mic
Wireless Mic Specifications:
- Transmission/receiving frequencies: 1680
- Presets: 12
- Switching bandwidth: 42 MHz
- Peak deviation: +/- 48 kHz
- Compander: HDX
- Frequency response (microphone): 80 – 18,000 Hz
- Signal-to-noise ratio: > 110 dB(A)
- THD, total harmonic distortion: < 0,9 %
- In compliance with: ETS 300422 , ETS 300445 , CE , FCC
- Audio-XLR connector: 3.5 mm jack
- Audio output level (balanced): +10 dBu max
- Dimensions (Receiver): 82 x 64 x 24 mm
- Weight (Receiver): ~ 160 g
- RF output power: 30 mW
- Operating time: typ. 8 h
- Input voltage range: 1.8 V line
- Input voltage range: 3.0 V eff line
- Dimensions (Transmitter): 82 x 64 x 24 mm
- Weight (Transmitter): ~ 160 g
- Transducer; Microphone type: electret
- AF sensitivity: 20 mV/Pa
- Sound pressure level (SPL): 130 dB SPL max.
- Pick-up pattern: omni- directional
You must be logged in to post a review.
Reviews
There are no reviews yet.